Teamcenter10.1安装手册

Teamcenter10.1安装手册

Teamcenter10.1安装手册

Teamcenter 10.1

Installation

Windows Publication Number

__2 J

on Clients Guide

Teamcenter10.1安装手册

Proprietary and restricted rights notice

This software and related documentation are proprietary to Siemens Product Lifecycle Management Software Inc.

2022年 Siemens Product Lifecycle Management Software Inc. All Rights Reserved. Siemens and the Siemens logo are registered trademarks of Siemens AG. Teamcenter is a trademark or registered trademark of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. All other trademarks, registered trademarks, or service marks belong to their respective holders.

Teamcenter10.1安装手册

Contents

Proprietary and restricted rights notice ............................................................. 2 Getting started with Teamcenter client installation ....................................... 1-1 Introduction to Teamcenter client installationSystem requirements ................................................................. 1-1 Preparing to install Teamcenter ............................................................................................................. Configuring Teamcenter installation ............................................................................................... 11-1-6 Starting Teamcenter installation .................................................................................. 1-7 Teamcenter Environment Manager interface ......................................................................................... 1-7 Basic concepts about Teamcenter installation ................................................................... .................................................................. 11-7-8 Installing the rich client ............................................................................. 2-1 Before you startInstall a four-tier rich client ....................................................................................................................... Install a two-tier

rich

clientAlternate

rich

client

configurations . ................................................................................................... .................................................................................................

22-12-1

-6

Configure

rich

client

features ............................................................................................ .................................................................................. 2-102-11 Creating a custom distribution ......................................................................... 3-1 Overview distribution

of

custom

distributionsCreate

3Create

a a

silent compact

........................................................................................

distribution ................................................................................................... ..............................................................................................

3-13-2

-5

Installing

Microsoft

Office

interfaces .............................................................. 4-1 Installing Microsoft Office interfacesInstalling Teamcenter Client for Microsoft Office .................................................................................. 4-1 Installing Teamcenter Extensions for Microsoft Office ............................................................ Install

Teamcenter Plug-in for Microsoft ProjectPatching Client for

Office ........................................................... ................................................ 4-124-2 Patching Extensions for 16

Office....................................................................................................

...........................................................................................

4-16

4-18

4-Installing

TCCS ....................................................................................................... 5-1 What is TCCS?Preparing to install TCCS ......................................................................................................................... 5-1 Enable TCCS using TEM ..................................................................................................... 5-2 Install TCCS using the stand-alone

installation

wizard....................................................................................................... ................................................. 55-3-6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Enabling multiple client sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Overview of multiple client sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing support services for multiple client sessions . . . . . . . . . . . . . . . . . . B-1 Uninstalling multiple client support services . . . . . . . . . . . . . . . . . . . . . . . . . B-2B-1

Teamcenter10.1安装手册

Contents

Uninstalling Teamcenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 Uninstall the rich client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 Uninstall Microsoft Office interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2 Uninstall TCCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4 Uninstall Engineering Process Management

rich

client

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

C-4

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index-1

Figures

Teamcenter Environment Manager ........................................................................ 1-7 Two-tier architecture

..................................................................................................

1-9

Four-tier

architecture .............................................................................................. 1-11 Sample silent installation configuration file ......................................................... 3-5

Platform support for Teamcenter servers and clients .......................................... 1-2 Required hard disk space for Teamcenter configurations .................................. 1-4

Teamcenter10.1安装手册

Chapter

1

Getting started with client installation

Teamcenter Introduction to Teamcenter client

installation ................................................................. 1-1 System requirementsWhere to find system requirements ............................................................................................................. 1-1

PlatformsSystem

hardware ........................................................................................................................... .............................................................................

11-1

Web

browserJava

Runtime

Environment ...................................................................................................................... .....................................

........................................................................ 1-11-3 -4 Software

integrations ...................................................................................................... ..........................................................................................

11-4-5

Preparing

to

install

Teamcenter .............................................................................................. 1-6 Configuring Teamcenter installation

..................................................................................

1-7

Starting

Teamcenter

installation ........................................................................................ 1-7 Teamcenter Environment Manager interface ................................................................... 1-7 Basic concepts about Teamcenter installationTeamcenter

clients

..................................................................

1-8Rich

client ................................................................................................................... ........................................................................................................... 1-8

Teamcenter client

network architecturesThin 11-8-8

Two-tier

..................................................................................................................

architecture ............................................................................................... ............................................................................... 11-8

File Management System (FMS)Four-tier

architecture ............................................................................................... 1-8-9 Selecting and configuring features

...............................................................................

Basic 1-121-12

tasks

in

Teamcenter Teamcenter

client

installation............................................................................ clientsInstalling

Installing

features ...................................................................................... .............................................................................. .................................................................... 1-13 1-13

1-13

Teamcenter10.1安装手册

Teamcenter10.1安装手册

Introduction to Teamcenter client installation

This guide describes how to install Teamcenter 10.1 on Microsoft Windows clients. This includes installation of Teamcenter two-tier rich clients using Teamcenter Environment Manager and four-tier rich clients using the Over-the-Web Installer. This guide assumes you have a thorough working knowledge of your operating system and general knowledge of Teamcenter use.

System requirements

Where to find system requirements

For information about versions of operating systems, third-party software, Teamcenter software, and system hardware certified for your platform, see the Siemens PLM Software Certification Database:

/ certification/teamcenter.shtml

Note

Some software requirements differ for non-English locales. When viewing the certification database, make sure you note any exceptions for your locale.

Platforms

Determine from the following table which Teamcenter 10.1 servers and clients are supported on your operating system. Bullet characters ( ) denote supported servers and clients.

Teamcenter10.1安装手册

Chapter 1

Getting started with Teamcenter client installation

Platform support for Teamcenter servers and clients

Operating System Microsoft Windows (desktop platforms)2 Microsoft Windows (server platforms)3 Sun Solaris

Hewlett-Packard HP-UX4 IBM AIX SUSE Linux Red Hat Linux5

Apple Macintosh Mac OS

Corporate Web server tier

Business

Modeler

Rich Thin IDE

TCCS1 client client client

Notes about platform support

General notes

For information about versions of operating systems certified for Teamcenter

10.1, see the Siemens PLM Software Certification Database. For information about installing Teamcenter on Windows servers, see the

Installation on Windows Servers Guide. For information about installing Teamcenter on Linux clients, see the

Installation on Linux Clients Guide. For information about installing Teamcenter on Macintosh clients, see the

Installation on Macintosh Clients Guide. If your Teamcenter database server is IBM DB2, all Teamcenter servers and

two-tier rich clients in your network must run operating systems supported for Teamcenter with IBM DB2. IBM DB2 databases are supported only with Teamcenter servers running on Microsoft Windows, IBM AIX, or SUSE Linux platforms. Microsoft Windows

Make sure the C:\\Temp directory exists, and grant full access permissions

to this directory for all users.

1. Teamcenter client communication system (TCCS) is installed with the rich client. This column refers to the stand-alone TCCS application.

2. Microsoft Windows desktop platforms include Windows XP and Windows 7. 3. Microsoft Windows server platforms include Windows Server 2022年. 4. Itanium platforms only. PA-RISC hardware is not supported. 5. Only -bit Red Hat Linux is supported.

Teamcenter10.1安装手册

Getting started with Teamcenter client installation

On Windows Server and Windows 7, disable Windows User Account Control

(UAC) before you install Teamcenter. This option is available in the Control Panel→User Accounts dialog box.

Windows UAC can interfere with Teamcenter installation programs. Siemens PLM Software recommends turning off UAC for administrative users only.

For more information, see Microsoft Windows documentation.

Disable the Windows TCP scaling feature. Open a command prompt and

enter the following command:

netsh interface tcp set global autotuninglevel=disabled

Siemens PLM Software recommends setting this parameter before installing Teamcenter because most client network infrastructures use one or more switches or routers. By default, Windows enables TCP window scaling, but some routers do not support this feature. This can cause installation failures that are difficult to diagnose and correct.

For more information, see Microsoft Windows documentation.

Teamcenter applications are provided in 32-bit and -bit versions. Use the

appropriate Teamcenter software distribution image for your platform. If you use a nonnative language operating system version of Windows, you

must install and enable the Multilingual User Interface (MUI) pack to ensure the language font is displayed properly.

1. Download and install the MUI pack for Windows from Microsoft.

2. Open the Regional and Language Options dialog box in the Windows

Control Panel. 3. In the Languages tab, set the required language for the menus and

dialogs. 4. In the Advanced tab and the Regional Options tab, set the required

language.

System hardware

Make sure your Teamcenter host has the required amount of disk space available. Required hard disk space for Teamcenter configurations shows the required disk space for the following common Teamcenter configurations: Corporate server

The corporate server contains the features included in the Corporate Server solution in Teamcenter Environment Manager (TEM). Additional features may require additional disk space.

For more information, see the appropriate server installation guide (for Windows or UNIX/Linux). Two-tier rich client

Teamcenter10.1安装手册

Chapter 1 Getting started with Teamcenter client installation

The two-tier rich client contains the features included in the Rich Client 2-tier solution in Teamcenter Environment Manager (TEM). Additional features may require additional disk space.

For more information, see Install a two-tier rich client.

Web tier

The Web tier includes the Web Application Manager, a distribution server, and a distribution server instance that contains the Over-the-Web installer and Rich Client 4-tier

solutions. Additional solutions may require additional disk space. For more information, see the appropriate server installation guide (for Windows or UNIX/Linux).

Required hard disk space for Teamcenter configurations

Platform

Hewlett-Packard HP-UX6 IBM AIX SUSE Linux Red Hat Linux Sun Solaris Microsoft Windows

Corporate server 3.0 GB 2.0 GB 2.0 GB 2.0 GB 2.5 GB 1.5 GB

Two-tier rich client Not supported Not supported 300 MB 300 MB Not supported 450 MB

Web tier 3 GB 3 GB 3 GB 3 GB 3 GB 4.5 GB

Web browser

The Teamcenter thin client and Over-the-Web Installer7 require a Web browser. Teamcenter 10.1 supports the following Web browsers:

Windows systems: Microsoft Internet Explorer and Mozilla Firefox Linux systems: Mozilla Firefox Macintosh systems: Apple Safari

For information about versions supported, see the Siemens PLM Software Certification Database.

Java Runtime Environment

Teamcenter Environment Manager (TEM) requires a supported Java Runtime Environment (JRE). You must download and install the required JRE before you install Teamcenter.

For information about required versions of the JRE for Teamcenter, see the Siemens PLM Software certification database:

6. Itanium platforms only. PA-RISC hardware is not supported.

7. The Over-the-Web Installer installs the four-tier Teamcenter rich client and Teamcenter Microsoft Office interfaces.

Teamcenter10.1安装手册

Getting started with Teamcenter client installation

/ certification/teamcenter.shtml

TEM verifies the required version of Java is available on the host. If the required version is not present, TEM does not launch.

Before you launch TEM to install Teamcenter, specify the location of the JRE by one of the following methods:

Set the appropriate environment variable on your host:

o

32-bit Java

Set the JRE_HOME environment variable to the location of the 32-bit Java JRE. o

-bit Java

Set the JRE_HOME environment variable to the location of the -bit Java JRE.

Note

You must use the appropriate Teamcenter software distribution image (32-bit or -bit) for the JRE you use.

Use the -jre argument to specify the JRE location when you launch TEM from a

command prompt:

tem ―jre JRE-path

For example:

tem Cjre c:\\apps\\jre1.7

TEM stores the JRE location during Teamcenter installation. After installation is complete, TEM no longer requires the JRE_HOME or JRE_HOME environment variable or the -jre

argument.

Software integrations

If you use Teamcenter 10.1 integrations to other Siemens PLM Software products or third-party software, install those products before you install Teamcenter 10.1. Some Siemens PLM Software products require separate licenses from your Siemens PLM Software representative. Siemens PLM Software products are licensed using the Siemens PLM Software Common Licensing Server.

For more information about the Common Licensing Server, see the appropriate server installation guide (for Windows or UNIX/Linux).

If you use any of the following integrations with the rich client, make sure you install these applications in locations specified by the Teamcenter administrator. Teamcenter Integration for NX or NX Integration

Obtain the NX software distribution image and install a supported version of NX on your workstation. You must install the optional Teamcenter Integration for NX executables.

For installation information, see the installation guide distributed with NX. Lifecycle Visualization

Teamcenter10.1安装手册

Chapter 1 Getting started with Teamcenter client installation

Obtain the Lifecycle Visualization software distribution image and install a supported version of Lifecycle Visualization on your workstation.

For installation information, see the installation guide distributed with Lifecycle Visualization.

SCM Integration C ClearCase

Obtain the IBM Rational ClearCase client distribution image and install a supported version on your workstation.

Note

Teamcenter Microsoft Office interfaces require additional software. For more information, see Installing Microsoft Office interfaces.

Preparing to install Teamcenter

To enable Teamcenter Environment Manager (TEM), make sure you complete the following:

Locate the Teamcenter software and documentation distribution images and

make sure they are accessible to your host. Specify the path to the required Java Runtime Environment (JRE) by setting

the appropriate environment variable on your host:

o

32-bit Java

Set the JRE_HOME environment variable to the location of the 32-bit Java JRE.

o -bit Java

Set the JRE_HOME environment variable to the location of the -bit Java JRE.

Note

You must use the appropriate Teamcenter software distribution image (32-bit or -bit) for the JRE you use.

Alternatively, you can specify the JRE path from the command line using the -jre argument when you launch TEM:

tem ―jre JRE-path

For example:

tem Cjre c:\\apps\\jre1.7

For information about required versions of the JRE for Teamcenter, see the Siemens PLM Software certification database:

/ certification/teamcenter.shtml

Teamcenter10.1安装手册

Getting started with Teamcenter client installation

Configuring Teamcenter installation

If your Teamcenter administrator configured the rich client to include Teamcenter lifecycle visualization, ensure you have administrator privileges on your workstation.

Starting Teamcenter installation

To begin installing Teamcenter installation, launch the appropriate Teamcenter installation tool:

Teamcenter Environment Manager

To install a Teamcenter rich client, launch Teamcenter Environment Manager using the tem.bat command from the Teamcenter software distribution image. Over-the-Web Installer

To install a Teamcenter four-tier rich client, open the URL to the Over-the-Web Installer provided by your Teamcenter administrator.

Teamcenter Environment Manager interface

Teamcenter Environment Manager is a tool that installs Teamcenter two-tier and four-tier

rich clients.

Teamcenter Environment Manager

Teamcenter10.1安装手册

Chapter 1 Getting started with Teamcenter client installation

Teamcenter Environment Manager also performs maintenance operations, such as upgrading servers, applying maintenance packs, and installing patches. You launch Teamcenter Environment Manager using the tem.bat command.

Basic concepts about Teamcenter installation

Teamcenter clients

Teamcenter provides clients suited to various uses and network configurations. These clients include the rich client, the thin client, and specialized clients such as Teamcenter Client for Microsoft Office and Teamcenter Extensions for Microsoft Office. Rich client

The rich client is a platform-independent client implementation (Java application) for users who interact with Teamcenter frequently. It is extendable and able to run both Teamcenter and customer-written applications. Customers can also extend the standard user interface.

The rich client application is deployed on each user workstation using Teamcenter Environment Manager or the Over-the-Web Installer, depending on which Teamcenter

network architecture you use. The rich client is supported in both architectural models described in Two-tier architecture and Four-tier architecture. Thin client

The thin client provides access to Teamcenter through a standard commercial Web browser, such as Microsoft Internet Explorer or Mozilla Firefox. The user interface provides a streamlined browser-based view of product information stored in a Teamcenter database.

The thin client is supported only in the four-tier architectural model described in Four-tier architecture.

Teamcenter network architectures

Teamcenter provides two architecture models for deployment: two-tier and four-tier. Two-tier architecture

The two-tier architectural model comprises the following tiers: Client tier

The client tier comprises the Teamcenter rich clients.

In a deployment of the two-tier architecture, the Teamcenter server runs on the client workstation.

Teamcenter10.1安装手册

Getting started with Teamcenter client installation

Note

The two-tier rich client is installed only through TEM. Over-the-Web installation is supported only for the four-tier rich client.

Some Teamcenter client features, such as Teamcenter Integration for NX, Lifecycle Visualization, and Teamcenter Client for Microsoft Office, require the Web tier, a component of the four-tier architecture. To enable these features for a two-tier rich client, you can connect the two-tier rich client to a deployment of the Web tier. For information about functionality you can add to a rich client and which add-ons require the Web tier, see the appropriate server installation guide (for Windows or UNIX/Linux).

Resource tier

The resource tier comprises a database server, database, volumes, and file servers.

Two-tier architecture

In the two-tier model, you deploy the Teamcenter rich client, which includes the local server, and the optional applications that integrate with the rich client on the client workstation. Typically, the database server, volumes, and file servers are installed on one or more separate hosts.

Teamcenter File Management System (FMS) manages the rich client access to volumes:

The FMS server cache (FSC) process run on the server hosting the volume.

The FMS client cache (FCC) process runs on the rich client host.

For more information about FMS and two-tier rich client architecture, see the appropriate Teamcenter server installation guide (for Windows or UNIX/Linux). Four-tier architecture

The four-tier architecture model comprises the following tiers:

Teamcenter10.1安装手册

Chapter 1 Getting started with Teamcenter client installation

Client tier

The client tier comprises the Teamcenter rich client, thin client, and other clients such as Teamcenter Client for Microsoft Office.

Note

The rich client can be deployed with additional functionality, such as Lifecycle Visualization, Teamcenter Client for Microsoft Office, and Teamcenter Integration for NX or NX Integration 4.0.1. (Teamcenter Integration for NX/NX Integration 3 is not supported.)

J2EE Web tier

The J2EE Web tier is a Java application that runs in a Java 2 Enterprise Edition (J2EE) application server, such as Oracle WebLogic, and is responsible for

communication between the client tier and enterprise tier. For information about supported application servers, see the Siemens PLM Software Certification Database:

/ certification/teamcenter.shtml

Enterprise tier

The enterprise tier comprises a configurable pool of Teamcenter C++ server processes and a server manager. The enterprise tier retrieves data from and stores data in the database.

A server manager manages a pool of Teamcenter server processes. You must install a server manager whenever you deploy the Web tier.

Note

Teamcenter provides server managers based on the J2EE and the Microsoft .NET platforms. Install the appropriate server manager for the Web tier you use.

Resource tier

The resource tier comprises a database server, database, volumes, and file servers.

Teamcenter10.1安装手册

Getting started with Teamcenter client installation

Four-tier architecture

You can design deployments that host the Web tier, resource tier, and enterprisetiers on the same computer or on separate computers:

Smaller sites can run the pool of servers and the server manager on the samehost as the Web tier.

Larger sites can distribute the pool of server processes across multiple hostsand optionally include an HTTP server to serve static files or multiple HTTP

servers to support load balancing.

For a multihost configuration, the server pool consists of multiple subpools, oneor more for each host. Each subpool is managed by one server manager process. The Web tier balances the load across the server pools.

Teamcenter10.1安装手册

Chapter 1 Getting started with Teamcenter client installation

The Teamcenter J2EE based server manager and Web tier application both employ the JBoss cache, a tree-structured cache, to provide replication and transaction context. You must configure the JBoss cache (called TreeCache in Teamcenter) in both the J2EE based server manager and the Web tier application.8

To ensure communication between the Web tier and the server manager, you must coordinate the values you specify for each component. For some values, you must provide the identical value when configuring the Web tier application.

For more information about four-tier rich client architecture, see the appropriate

Teamcenter server installation manual (for Windows or UNIX/Linux). A minimum of one server manager for each Web tier deployment.

A separate TreeCache cluster for each environment.

To configure a separate TreeCache cluster, Siemens PLM Software recommends configuring a different port (multicast) or set of ports (TCP) for each cluster.

File Management System (FMS)

File Management System (FMS) is a file storage, caching, distribution, and access system. FMS provides global, secure, high-performance and scalable file management. Use FMS to centralize data storage volumes on reliable backup file servers, while keeping data close to users in shared data caches. This enables

centralized storage and wide distribution of file assets to the needed locations within a single standard file management system. FMS provides WAN acceleration to effectively move large files across WAN assets.

Teamcenter client installation programs installs FMS executables and an FMS client cache (FCC) on client hosts and sets the FMS_HOME environment variable in the user environment.

FMS downloads files to client hosts from Teamcenter volumes and uploads files from client hosts to Teamcenter volumes. FMS_HOME points to the location of the FMS executables on the client host. All Teamcenter clients installed on a host use the FMS executables defined in FMS_HOME.

If other users on a client host want to use the same installed client environment, they must manually set FMS_HOME in their user environments. Using the same installed environment shares only the binaries and run-time content; the file cache contents remain private to the user.

Selecting and configuring features

If you install the rich client using the Over-the-Web Installer, the features your client installation includes is a selection of features configured by your Teamcenter administrator.

The Teamcenter administrator may include the following optional Teamcenter features, applications, and integrations with the rich client:

Teamcenter Integration for NX/NX Integration SCM Integration C ClearCase

8. This is not required if you use the .NET Web tier and the .NET based server manager.

Teamcenter10.1安装手册

Getting started with Teamcenter client installation

Teamcenter Automotive EditionTeamcenter lifecycle visualization (stand-alone and embedded viewers)

CGM Overlay

Remote workflow (object linking with Teamcenter portfolio, program and

projectmanagement)

For information about the optional features, applications, and integrations installedwith your rich client, contact your Teamcenter administrator.

If you install the rich client using Teamcenter Environment Manager, you can selectclient features in the to that feature in the list. You can also see a complete list of available features inSelect Features panel. For a description of any feature, point the appropriate server installation guide (for Windows or UNIX/Linux).

Basic tasks in Teamcenter installation

Teamcenter client installation consists of running the appropriate Teamcenterinstallation wizard and then performing any additional client-side configuration required for the Teamcenter features you select.

Installing Teamcenter clients

Install Teamcenter clients using the appropriate client installation method(Teamcenter Environment Manager or the Over-the-Web Installer). Installing client features

Perform any postinstallation steps necessary for the client features you selected.