Compact Crawler ExcavatorOPERATING 27,558 - 28,219 lbs WEIGHT(12,500 -12,800 kg)NET ENGINE94 hp POWER(64 kW) MAX DIG DEPTH15' 4\" (4.67 m)MAX REACH27' 2\" (8.28 m)ROTAVAC5XER2ELW1ARCCTCATPMOCOperating Data, Standard EquipmentOperating weight (rubber crawlers)27,558 lb (12,500 kg)Operating weight (steel crawlers) 28,219 lbs (12,800 kg) Overall length (travel position)15' 4\" (4.7 m)Overall height (travel position) 18' 7\" (5.7 m)Total length (transport position)23' 8\" (7.3 m)Total width with dozer blade 8' 2\" (2.5 m)Total height (top of cab) 9' 5\" (2.9 m)Ground clearance 16\" (420 mm)Uppercarriage tailswing 4' 5\" (1.4 m)Uppercarriage front swing8' 6\" (2.6 m)Working envelope,180°12' 10\" (3.9 m)Working envelope,360°17' 2\" (5.2 m)Breakout force (SAE J 1179)* 18,338 lbs (81,500 N)Ripping force (SAE J 1179)* 13,725 lbs (61,000 N)Ground pressure (rubber crawlers)6.1 psi (0.43 daN/cm2)Ground pressure (steel crawlers)6.3 psi (0.44 daN/cm2)*Standard equipment,may vary with different bucket.SpecificationsEngineManufacturer,modelType Deutz,BF 4 M 20124-cylinder,turbocharged diesel engineCombustion 4-stroke,direct injectionDisplacement 246 in3(4.0 L)Net power rating at 2,100 rpm (SAE J 1349)Cooling system Electrical System94 hp (69 kW)WaterFluid CapacitiesFuel tank 12 V12 V / 135 Ah / 600 AHydraulic System50 gal (190 L)37 gal (140 L)Nominal voltage Battery Power TransmissionHydraulic system (including tank)Working hydraulics:Axial piston pump with load-sensing,coupled with Hydrostatic drive with reduction gear.Gear-integrated multi-disc brakeacting as parking brake,automatic hydraulically bled; 2-stage variabledisplacement motor,full power shift.Two speed ranges:Travel speed forward/reverse 0 – 1.7 mph (0 – 2.7 km/h)0–3.4 mph (0 – 5.4 km/h) aload-independent flow division (LUDV).Simultaneous,independentcontrol of all movements.Sensitive maneuvers irrespective of loads.Pump capacity Maximum working pressure 42 gpm (158 Lpm)5,075 psi (350 bar)Dual gear pump for all positioning and swing movements.Pressure Gradeability > 60%cut-off valve for sensitive and energy-saving swing movements.Drawbar pull 18,450 lbs (82 kN)Pump capacities 11 + 9.5 gpm (41.4 + 36 Lpm)Travel motion alarm (acoustic signal) as standard fittingUndercarriageMaximum working pressure Control circuit for work attachments:Pump capacity Maximum working pressure 3,335 psi (230 bar)adjustable5,075 psi up to (350 bar)Maintenance-friendly crawler-type undercarriage with triple grouser platesor rubber crawlers.Idler suspension with hydraulic crawler tensioning.Rubber crawlersSteel crawlersTotal length (sprocket/idler)Total length Dozer Blade18\" (450 mm)20\" (500 mm)8' 6\" (2.6 m)10' 10\" (3.3 m)Two servo-assisted four way control levers for excavator operations.KnickmatikBoom offset to provide lateral parallel adjustment at full digging depth.Angle of artic./ lateral adjustment left Angle of artic./ lateral adjustment right Cab55°/2' 8\" (55°/ 855 mm)55°/3' 3\" (55°/ 995 mm)Independent from drive train,sensitive control via hand lever,float position.Width Cut below ground Lift above ground Slope angle Steering 8' 2\" (2.5 m)16\" (400 mm)20\" (500 mm)35°Sound-insulated,full-vision steel cab.Safety glass windows.Thermowindows tinted in green.Left-hand outside rear-view mirror.Cab heatingthrough hot water heat exchanger and separate windshield defroster.Pneumatically cushioned comfort seatwith armrests,longitudinal,height,and backrest adjustments.Operator control levers adjustable inlongitudinal position.Instrument panel that contains three gauges and six warning lights.Working floodlight Halogen H-3.Noise emission ambience LWA 103 dB (A) Noise emission cab LpA 80 dB (A)Measured in dynamic measuring cycle (EEC-directive 2000/14).*Optional FOPS approved skylight guard available.
Independent control of crawlers and counter rotation sensitive servo-control via pilot-operated foot pedals combined with hand levers.Swing System Hydrostatic drive with 2-stage planetary gear and axial piston fixeddisplacement motor also acting as a low maintenance break.In addition,an automatically controlled spring-loaded multi-disc brake acts as aparking brake when the pilot control lever is in neutral position.Swing speed 0 – 9 rpm2
Compact Crawler Excavator
TC125
24'11\"(7.59m)23'11\"(7.30m)21'6\"(6.55m)20'9\"(6.33m)17'11\"(5.45m)17'2\"(5.24m)15'4\"(4.67m)14'2\"(4.33m)10'2\"(3.11m)9'2\"(2.79m)26' 0\" (7.93 m)*All dimensions are based on undercarriage with rubber crawlers.27' 2\" (8.28 m)Dipperstick 79\" (2.0 m)Dipperstick 93\" (2.35 m)Lifting Capacities: 79\" (2.0 m) DipperstickUnit:x1,000 lbs (Metric tons)Bucket hinge pin height 9' 10\" (3.0 m) Supported by blade Traveling 4' 11\" (1.5 m) Supported by blade Traveling 0Supported by blade Traveling -2'4\"(- 0.7 m) Supported by blade Traveling 10’ 6”(3.2 m) Load radius from the center of the ring gear13’ 1”(4.0 m) 16’ 5”(5.0 m) 19’ 8”(6.0 m) 21’ 8”(6.6 m)EndSideEndSideEndSideEndSide9'5\"(2.87m)End18'9\"(5.71m)Side10.6 (4.80)4.5 (2.06)6.9 (3.15) –7.9 (3.58)7.4 (3.36)7.8 (3.53)7.2 (3.28)11.7 (5.32)6.3 (2.86)7.8 (3.53)4.6 (2.07)13.0 (5.91)5.8 (2.65)7.1 (3.21)5.7 (2.59)14.0 (6.37)6.0 (2.74)7.2 (3.26)5.8 (2.61)6.7 (3.02)5.0 (2.28)5.1 (2.32)5.0 (2.26)8.6 (3.90)4.5 (2.03)5.7 (2.60)4.6 (2.07)10.0 (4.53)4.4 (1.98)5.3 (2.41)4.3 (1.95)9.7 (4.40)4.3 (1.95)5.6 (2.34)4.2 (1.91)6.1 (2.78) 3.7 (1.70)4.5 (2.03) 3.7 (1.69)7.1 (3.25) 3.5 (1.60)4.4 (1.98) 3.6 (1.62)6.5 (2.87) 3.3 (1.51)2.5 (1.14) 3.3 (1.48)8.1 (3.69) 3.4 (1.52)3.9 (1.77) 3.3 (1.50)12.5 (5.68) 3.3 (1.48)3.0 (1.37) 3.2 (1.46)6.5 (2.93) 3.0 (1.36)3.6 (1.65) 2.9 (1.33)7.1 (3.20) 2.9 (1.32)3.6 (1.64) 2.9 (1.30)7.4 (3.37) 3.0 (1.37)3.5 (1.57) 3.0 (1.34)15.9 (7.19) 8.6 (3.90)10.2 (4.66) 8.4 (3.83)16.1 (7.30) 8.9 (4.02)10.4 (4.70) 8.6 (3.92)15.0 (6.84) 8.1 (3.67)9.8 (4.45) 8.0 (3.62)The above loads (all values in lbs x 1,000 resp.metric tons) are in compliance with SAE J 1097.They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.In each case,the smaller value is indicated.All values were determined with load hook.In the event of an attached bucket the difference weights bucket minus load hook must be deducted from thepermissible payloads.When used for crane operations,excavators must be equipped with hose-rupture safety valves and overload warning device.Working equipment:Rubber crawlers,dipperstick 79\" (2.0m).
3
Compact Crawler Excavator
TC125
10' (255 mm)2'8\" (855 mm)15\" (395 mm)Transporting Position
23' 8\" (7.3 m)4' 5\" (0.3 m)2'8\"(855mm)3' 3\" (995 mm)8' 6\" (2.0 m)9'5\" (2.5 m)Optional AccessoriesBucket OptionsMechanical quick-coupler system for work tools (QMH)DipperstickAdditional control circuit for hydraulic hammerQuick-change adapter for hydraulic hammerFOPS skylight guardHose rupture safety valves for intermediate boom/dipperstickFilling with biodegradable hydraulic oil,ester-based VI68Electrical tank refueling pumpSet of working floodlights (cab-mounted,front & rear)Immobilizer (anti-theft device)Crawler-type OptionsPin-on Style / Quick CouplerCapacity cu.yd.(Liters)79\" (2.0 m)18\" (450 mm) H.D.Bucket24\" (600 mm) H.D.Bucket30\" (760 mm) H.D.Bucket36\" (900 mm) H.D.Bucket54\" (1,370 mm) Ditch-cleaning Bucket48\" (1,220 mm) Tilt-Bucket (45 degree rotation)Hydraulic Hammer 0.340.500.660.830.830.70260382505635635535Sound insulated.Tools:Moil point or chisel point Steel Crawlers Rubber Crawlers 24\" (600 mm),28\" (700 mm),32\" (800 mm)18\" (450 mm)For more information,product demonstration,or details on purchase,lease and rentalplans,please contact your local Terex Distributor.
Terex Construction Americas
8800 Rostin Road Southaven,MS 38671USA
TEL 662-393-1800SALES 866-837-3923
PARTS & TECH SUPPORT888-201-6008FAX 662-393-1700
EMAIL sales@terexca.comWEB terexca.com
Effective date: August 15, 2006. For further information, please contact your local distributor or the Terex sales office listed. Product specifications are subject to change without notice or obligation. The photographs and drawingsin this brochurearefor illustrative purposes only.Refer to the appropriate Operator's Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator's Manual when using our equipmentor to otherwise act irresponsibly may result in serious injury or death. Prices and specifications subject to change without notice. The only warranty applicable is the standard written warranty applicable to the particular productand sale. Terex makes no other warranty, expressed or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries andall rights are reserved. \"Terex\" is a Registered Trademark of Terex Corporation in the USA and many other countries. Copyright ©2006 Terex Corporation
TC125 5K 0207A Part #109290
因篇幅问题不能全部显示，请点此查看更多更全内容