PHOTOCOUPLER
PS2501-1,-2,-4, PS2501L-1,-2,-4
HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES
−NEPOC Series−
DESCRIPTION
The PS2501-1, -2, -4 and PS2501L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor.
The PS2501-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2501L-1, -2, -4 are lead bending type (Gull-wing) for surface mount.
FEATURES
• High isolation voltage (BV = 5 000 Vr.m.s.) • High collector to emitter voltage (VCEO = 80 V) • High-speed switching (tr = 3 µs TYP., tf = 5 µs TYP.)
• Ordering number of tape product: PS2501L-1-E3, E4, F3, F4, PS2501L-2-E3, E4 • Safety standards
• UL approved: File No. E72422
12PIN CONNECTION(Top View)PS2501-1, PS2501L-1431. Anode2. Cathode3. Emitter4. CollectorAPPLICATIONS
• Power supply • Telephone/FAX. • FA/OA equipment
• Programmable logic controller
PS2501-2, PS2501L-287651, 3. Anode2, 4. Cathode5, 7. Emitter6, 8. Collector1234PS2501-4, PS2501L-416151413121110912345678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter10, 12, 14, 16. Collector
Document No. PN10225EJ02V0DS (2nd edition) Date Published April 2005 CP(K)
The mark shows major revised points.
元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
PACKAGE DIMENSIONS (UNIT : mm)
DIP Type (New package)
PS2501-14.6±0.3519.8±0.5PS2501-46.5±0.57.626.5±0.57.623.2±0.44.15±0.43.2±0.44.15±0.43.5±0.31.25±0.150 to 15˚+0.10.25 –0.050.50±0.100.25 M2.543.5±0.31.25±0.152.540.50±0.100.25 M0 to 15˚+0.10.25 –0.05
Caution New package 1-ch, 4-ch only
DIP Type
PS2501-14.6±0.59.7±0.5PS2501-26.5±0.56.5±0.57.623.3±0.54.15±0.43.3±0.54.15±0.43.5±0.33.5±0.37.621.25±0.150 to 15˚+0.10.25 –0.050.50±0.100.25 M2.541.25±0.152.540.50±0.100.25 M0 to 15˚+0.10.25 –0.05PS2501-419.8±0.56.5±0.57.623.3±0.54.15±0.43.5±0.31.25±0.152.540.50±0.100.25 M0 to 15˚+0.10.25 –0.05 2
Data Sheet PN10225EJ02V0DS
元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
Lead Bending Type (New package)
PS2501L-14.6±0.3519.8±0.5PS2501L-46.5±0.5+0.10.25 –0.056.5±0.5+0.10.1 –0.05+0.10.25 –0.053.5±0.33.5±0.31.25±0.150.25 M2.540.150.9±0.259.60±0.41.25±0.150.25 M2.540.150.9±0.259.60±0.4+0.10.1 –0.05
Caution New package 1-ch, 4-ch only
Lead Bending Type
PS2501L-14.6±0.59.7±0.5PS2501L-26.5±0.56.5±0.5+0.10.25 –0.05+0.10.25 –0.05+0.10.1 –0.053.5±0.33.5±0.31.25±0.150.25 M2.540.150.9±0.259.60±0.41.25±0.150.25 M2.540.150.9±0.259.60±0.4PS2501L-419.8±0.56.5±0.5+0.10.25 –0.053.5±0.31.25±0.150.25 M2.540.150.9±0.259.60±0.4+0.10.1 –0.05+0.10.1 –0.05 Data Sheet PN10225EJ02V0DS
3
元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
MARKING EXAMPLE
PS2501-1No. 1 pinMarkNo. 1 pinMarkPS2501-2, -42501MD003Assembly LotPS2501-2MD003Country AssembledType NumberAssembly LotMD003MD003Week AssembledYear Assembled(Last 1 Digit)In-house CodeCTR Rank CodeWeek AssembledYear Assembled(Last 1 Digit)In-house CodeCTR Rank CodePackageStandard PKGNew PKGMade in JapanMade in TaiwanPackageStandard PKGNew PKG*1 PS2501-4 onlyMade in JapanMade in TaiwanDE*1FDEFH 4 Data Sheet PN10225EJ02V0DS 元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
ORDERING INFORMATION
Part Number
Order Number
Solder Plating Specification
PS2501-1
PS2501-1
Solder
Magazine case 100 pcs
Packing Style
Safety Standard
Approval Standard products (UL Approved)
Application Part NumberPS2501-1 PS2501-2 PS2501-4 PS2501-1 PS2501-2 PS2501-4
*1
PS2501L-1 PS2501L-1 PS2501L-1-E3
PS2501L-1-E3
contains lead Pb-Free
Embossed Tape 1 000 pcs/reel
Embossed Tape 2 000 pcs/reel
Magazine case 45 pcs
Embossed Tape 1 000 pcs/reel
Magazine case 20 pcs
Magazine case 100 pcs
Embossed Tape 1 000 pcs/reel
Embossed Tape 2 000 pcs/reel
Magazine case 45 pcs
Embossed Tape 1 000 pcs/reel
Magazine case 20 pcs
PS2501L-1-E4 PS2501L-1-E4 PS2501L-1-F3
PS2501L-1-F3
PS2501L-1-F4 PS2501L-1-F4 PS2501-2
PS2501-2
PS2501L-2 PS2501L-2 PS2501L-2-E3
PS2501L-2-E3
PS2501L-2-E4 PS2501L-2-E4 PS2501-4
PS2501-4
PS2501L-4 PS2501L-4 PS2501-1
PS2501-1-A
PS2501L-1 PS2501L-1-A PS2501L-1-E3
PS2501L-1-E3-A
PS2501L-1-E4 PS2501L-1-E4-A PS2501L-1-F3
PS2501L-1-F3-A
PS2501L-1-F4 PS2501L-1-F4-A PS2501-2
PS2501-2-A
PS2501L-2 PS2501L-2-A PS2501L-2-E3
PS2501L-2-E3-A
PS2501L-2-E4 PS2501L-2-E4-A PS2501-4
PS2501-4-A
PS2501L-4 PS2501L-4-A
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10225EJ02V0DS
5
元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
ABSOLUTE MAXIMUM RATINGS (Unless otherwise specified, TA = 25°C)
Ratings Parameter Symbol PS2501-1, PS2501-2,-4
PS2501L-1
Diode Reverse Voltage
Forward Current (DC) Power Dissipation Derating
PS2501L-2,-4
Unit
VR 6 V IF 80 mA ∆PD/°C 1.5 1.2 mW/°C
120 mW/ch Power Dissipation PD 150
Peak Forward Current
*1
IFP 1 A VCEO 80 V VECO 7 V IC 50 mA/ch Transistor Collector to Emitter Voltage
Emitter to Collector Voltage
Collector Current
Power Dissipation Derating
∆PC/°C 1.5 1.2 mW/°C
120 mW/ch Power Dissipation PC 150 Isolation Voltage
*2
BV 5 000 Vr.m.s. TA Tstg
−55 to +100 −55 to +150
°C °C
Operating Ambient Temperature Storage Temperature
*1 PW = 100 µs, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together (PS2501-1, PS2501L-1). Pins 1-4 shorted together, 5-8 shorted together (PS2501-2, PS2501L-2). Pins 1-8 shorted together, 9-16 shorted together (PS2501-4, PS2501L-4).
6
Data Sheet PN10225EJ02V0DS
元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage
VF
IF = 10 mA VR = 5 V
V = 0 V, f = 1.0 MHz VCE = 80 V, IF = 0 mA
1.17 50
1.4 5 100
V
Reverse Current IR Terminal Capacitance Ct Transistor Collector to Emitter Dark
Current
Coupled
Current Transfer Ratio (IC/IF)
*1
µA
pF nA
ICEO
CTR IF = 5 mA, VCE = 5 V 80 300 600 %
Collector Saturation VCE(sat)
Voltage
Isolation Resistance RI-O Isolation Capacitance CI-O Rise Time Fall Time
*2*2
IF = 10 mA, IC = 2 mA
11
0.3 V
VI-O = 1.0 kVDC 10V = 0 V, f = 1.0 MHz
0.5
Ω pF
tr VCC = 10 V, IC = 2 mA, RL = 100 Ω 3 µs
5 tf
*1 CTR rank ( * : only PS2501-1, PS2501L-1)
K* : 300 to 600 (%) L* : 200 to 400 (%) M* : 80 to 240 (%) D* : 100 to 300 (%) H* : 80 to 160 (%) W* : 130 to 260 (%) Q* : 100 to 200 (%) N : 80 to 600 (%)
*2 Test circuit for switching time
Pulse InputIFVCCµPW = 100 sDuty Cycle = 1/10VOUTRL = 100 Ω50 Ω Data Sheet PN10225EJ02V0DS 7 元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = 25°C)
DIODE POWER DISSIPATION vs.TRANSISTOR POWER DISSIPATIONAMBIENT TEMPERATUREvs. AMBIENT TEMPERATURETransistor Power Dissipation PC (mW)
150Diode Power Dissipation PD (mW)150100PS2501-2PS2501L-2PS2501-4PS2501L-450PS2501-1PS2501L-11.5 mW/˚C100PS2501-2PS2501L-2PS2501-4PS2501L-450PS2501-1PS2501L-11.5 mW/˚C1.2 mW/˚C1.2 mW/˚C02550751001251500255075100125150Ambient Temperature TA (˚C)Ambient Temperature TA (˚C)FORWARD CURRENT vs.FORWARD VOLTAGE10050Forward Current IF (mA)COLLECTOR CURRENT vs.COLLECTOR TO EMITTER VOLTAGE7060Collector Current IC (mA)105TA = +100˚C+60˚C+25˚C5040302010A m0A5 m20 mA1010.50˚C–25˚C–50˚CIF = 5 mA0.10.70.80.91.01.11.21.31.41.50246810Forward Voltage VF (V)Collector to Emitter Voltage VCE (V)COLLECTOR TO EMITTER DARKCURRENT vs. AMBIENT TEMPERATURECollector to Emitter Dark Current ICEO (nA)COLLECTOR CURRENT vs.COLLECTOR SATURATION VOLTAGE4050 mA20 mA10 mA10 000Collector Current IC (mA)1 000VCE = 80 V40 V24 V10 V5 V1055 mA2 mA10010.5 IF = 1 mA101–50–2502550751000.100.20.40.60.81.0Ambient Temperature TA (˚C)Collector Saturation Voltage VCE(sat) (V)
Remark The graphs indicate nominal characteristics.
8
Data Sheet PN10225EJ02V0DS
元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
NORMALIZED CURRENT TRANSFERRATIO vs. AMBIENT TEMPERATURENormalized Current Transfer Ratio CTR
CURRENT TRANSFER RATIO vs.FORWARD CURRENT450Current Transfer Ratio CTR (%)1.21.00.80.60.40.20Normalized to 1.0at TA = 25˚C,IF = 5 mA, VCE = 5 V4003503002502001501005000.050.10.515Sample ABCDVCE = 5 V–50–2502550751001050Ambient Temperature TA (˚C)Forward Current IF (mA)SWITCHING TIME vs.LOAD RESISTANCE50IC = 2 mA,VCC = 10 V,CTR = 290%tftrSwitching Time t ( µ s)SWITCHING TIME vs.LOAD RESISTANCE1 000IF = 5 mA,VCC = 5 V,CTR = 290%tfSwitching Time t ( µ s)10100tstdts110tr0.110501005001 k5 k10 k1100td5001 k5 k10 k50 k100 kLoad Resistance RL (Ω)Load Resistance RL (Ω)FREQUENCY RESPONSEIF = 5 mA,VCE = 5 VCTR (Relative Value)LONG TERM CTR DEGRADATION1.2IF = 5 mA 1.00.80.60.40.2TA = 60˚C0Normalized Gain GV–5–10100 ΩTA = 25˚C–15–20RL = 1 kΩ300 Ω0.51251020501002005000102103Time (Hr)104105Frequency f (kHz)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10225EJ02V0DS
9
元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
TAPING SPECIFICATIONS (UNIT : mm)
Outline and Dimensions (Tape)2.0±0.14.0±0.11.75±0.1φ1.5+0.1–04.5 MAX.16.0±0.37.5±0.11.55±0.18.0±0.110.3±0.15.3±0.14.0±0.10.4Tape DirectionPS2501L-1-E3PS2501L-1-E4Outline and Dimensions (Reel)2.0±0.52.0±0.5φ13.0±0.2R 1.0φ21.0±0.8φ80.0±1.0φ254±2.017.5±1.021.5±1.0Packing: 1 000 pcs/reel15.9 to 19.4Outer edge of flange 10
Data Sheet PN10225EJ02V0DS
元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
Outline and Dimensions (Tape)2.0±0.14.0±0.11.75±0.1φ1.5+0.1–04.5 MAX.16.0±0.37.5±0.11.55±0.18.0±0.110.3±0.15.3±0.14.0±0.10.4Tape DirectionPS2501L-1-F3PS2501L-1-F4Outline and Dimensions (Reel)2.0±0.52.0±0.5φ13.0±0.2φ330±2.0R 1.0φ21.0±0.8φ100±1.017.5±1.021.5±1.0Packing: 2 000 pcs/reel15.9 to 19.4Outer edge of flange Data Sheet PN10225EJ02V0DS
11
元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
Outline and Dimensions (Tape)2.0±0.14.0±0.11.75±0.11.5+0.1–04.5 MAX.16.0±0.37.5±0.110.3±0.11.55±0.112.0±0.110.4±0.10.34.0±0.1Tape DirectionPS2501L-2-E3PS2501L-2-E4Outline and Dimensions (Reel)2.0±0.52.0±0.5φ13.0±0.2φ330±2.0R 1.0φ21.0±0.8φ100±1.017.5±1.021.5±1.0Packing: 1 000 pcs/reel15.9 to 19.4Outer edge of flange 12
Data Sheet PN10225EJ02V0DS
元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Number of reflows • Flux
260°C or below (package surface temperature) 10 seconds or less 60 seconds or less Three
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
• Time to preheat temperature from 120 to 180°C 120±30 s
Recommended Temperature Profile of Infrared ReflowPackage Surface Temperature T (˚C)(heating)to 10 s260˚C MAX.220˚Cto 60 s180˚C120˚C120±30 s(preheating)Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux (3) Soldering by soldering iron • Peak temperature (lead part temperature) • Time (each pins) • Flux (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. Data Sheet PN10225EJ02V0DS 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 350°C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 13 元器件交易网www.cecb2b.com
PS2501-1,-2,-4, PS2501L-1,-2,-4
(4) Cautions • Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
USAGE CAUTIONS
1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity.
14
Data Sheet PN10225EJ02V0DS
元器件交易网www.cecb2b.com
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS Lead (Pb) Mercury Cadmium
Hexavalent Chromium PBB PBDE
Concentration Limit per RoHS (values are not yet fixed)
< 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM
Concentration contained
in CEL devices
-A -AZ Not Detected (*)
Not Detected Not Detected Not Detected Not Detected Not Detected
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
因篇幅问题不能全部显示，请点此查看更多更全内容