RMDVB1-9PS003P资料

Micro-D Plastic Shell - .050\" Contact Spacing

Microminiature Rectangular Connectorswith MICRO-Pin Contacts on .050 (1.27)centers. MICRO-D microminiature rack/panel connec-tors are used in applications requiring highlyreliable, extremely small, lightweight connec-tors. These connectors are available in 2 insu-lator materials, 2 mounting variations, 7 shellsizes accommodating from 9 to 51 contactsand a special arrangement of 5 micro contactsand 2 coaxials. The insulator materials listedgive the MICRO-D connector wide versatilityin most applications required by industry.

ITT can also terminate a wide variety ofstranded or solid wire directly to MICRO-Dcontacts, which is often desirable in high den-sity arrangements.

MICRO-D connectors can also be custom har-nessed to meet any customer requirement ofsingle or multiple connectors. Pigtail lead andharness description must be given by the cus-tomer. A typical description would be: .5\" #25AWG, gold plated copper leads or 18\" of #26yellow, Teflon-insulated, Type E wire. Shownbelow are various methods of termination.Consult customer service for any routine orcomplex harnessing of MICRO-D connectors.

MD**

•Glass-filled diallyl phthalate thermosetmaterial used in high temperature applica-tions that is immune to cleaning solvents.It also has excellent dielectric properties.Temperature range: -65˚F to +300˚F (-55˚C to +149˚C).

•Glass-filled polyester thermoplastic that isnot affected by cleaning solvents andexhibits excellent dielectric properties.Temperature range: -55˚F to +257˚F (-65˚C to +125˚C).

Specifications

MATERIALS AND FINISHES

Shell/Insulator (One Piece)MD/MDB: Glass-filled

thermoset plasticMDV/MDVB: ThermoplasticContacts

-Copper alloy, gold plate

Wire Size

Contact TerminationELECTRICAL DATANo of Contacts

-9to 51: (1 arrangement of 5 contacts and 2 coaxials - for screw mount only)

-RG-178/U (Not available for MD clip mount)-#24 thru #32 AWG-Multi-indent crimp

Coaxial Cable

MECHANICAL FEATURESSize or LengthCouplingPolarization

Contact Spacing CentersShell Styles

-7sizes

-Friction/jackscrews

-Keystone-shaped shells-.050 (1.27mm)-Plug and receptacle

Consult factory for availabilty.

How to Order

PCB ordering information - page 30

RoHSCOMPLIANCE

SERIES-INSULATOR STYLE-MATERIALCONTACTSPACINGCONTACTARRANGEMENTCONTACTTYPETERMINATION TYPETERMINATION CODELOCKINGHARDWARE

SERIES-INSULATOR STYLE-MATERIAL

MDB - Screw mounting-Diallyl phthalateMDVB - Screw mounting-PolyesterCONTACTSPACING

1-.050 (1.27) centers

CONTACTARRANGEMENT

9-15-21-25-31-37-51. See page 9CONTACTTYPE

P-Pin S - Socket

TERMINATION TYPE

H-Insulated solid or stranded wireL-Uninsulated solid wire

S-Solder pot to accept #26 AWG max.

harness wire.TERMINATION CODE

See page 79 and 81foradditional codes

(H) 001 - 18\",7/34strand, #26 AWG, MIL-W-16878/4,Type ETeflon, Yellow.(H) 003 - 18\",7/34strand, #26 AWG, MIL-W-16878/4,Type ETeflon, color coded to MIL-STD-681System I.

(L) 1 - 1/2\"uninsulated solid #25 AWG gold plated copper.(L) 2 - 1\"uninsulated solid #25 AWG gold plated copper.

LOCKINGHARDWARE (SCREWMOUNTINGONLY)P-Jackpost

K-Jackscrew-standardL-Jackscrew-low profileF-Float mount

M-Military specification hardware, see page 13.

No designator - No hardware - standard mounting.091 (2.31) hole diameter

R

MD** 1-9PH001P

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

28

元器件交易网www.cecb2b.com

Micro-D Plastic Shell - .050\" Contact Spacing

Standard Wire Termination Codes

MDB/MDVB

The following termination codes are listed for your information. For additional codes please refer to Appendixonpage 79 and 81. All wire lengths are minimum.Harness Type(H)SolidUninsulatedType(L)

#26 AWG per MIL-W-16878 Type ETeflon,stranded.

#25AWG Gold Plated Copper

Length3(76.2)

6(152.4)8(203.2)10(2.0)12(304.8)18 (457.2)20(508.0)24(609.6)30(762.0)36(914.4)48(1219.2)72(1828.8)120(3048.0)*Cavity #1 black

All YellowH020H019H026H029H028H001H038H009H010H011H013H017H042

ColorCoded*H027H016H034H025H002H003H023H004H005H006H048H046H041

TerminationCode

L61L56L57L39L58L1L14L2L7L6L16L10

Length.125(3.18).150 (3.81).190(4.83).250 (6.35).375(9.52).500 (12.70).750 (19.05)1.000 (25.40)1.500 (38.10)2.000 (50.80)2.500 (63.50)3.000 (76.20)

With Screw Mounting Holes (Conforms to MIL-DTL-83513)

MDB

Glass-filled Diallyl PhthalatePlastic Insulator

B.304 (7.72)MAX..395 (10.03)MAX..204 (5.18)MAX. MDVB

Glass-filled PolyesterPlastic Insulator

.110(2.79)MAX.DTWO MTG. HOLES .091 ± .003(2.31 ± 0.08)FR

C.100 (2.)MAX.Solder Pot

B.285 (7.24)MAX..375 (9.92)MAX.C.100 (2.)MAX..185 (4.70)MAX..200(5.08)MAX.

+AF+E.1(3.91)MAX.D+.200(5.08)MAX.

A+ESolder Pot

Part Number by Shell SizeMDB1-9P**MDVB1-9P**MDB1-9S**MDVB1-9S**MDB1-15P**MDVB1-15p**MDB1-15S**MDVB1-15S**MDB1-21P**MDVB1-21P**MDB1-21S**MDVB1-21S**MDB1-25P**MDVB1-25P**MDB1-25S**MDVB1-25S**MDB1-31P**MDVB1-31P**MDB1-31S**MDVB1-31S**MDB1-37P**MDVB1-37P**MDB1-37S**MDVB1-37S**MDB1-51P**MDVB1-51P**MDB1-51S**MDVB1-51S**A

Max..788 (20.02).788 (20.02).938 (23.82).938 (23.82)1.088 (27.)1.088 (27.)1.188 (30.18)1.188 (30.18)1.338 (33.98)1.338 (33.98)1.488 (37.80)1.488 (37.80)1.438 (36.52)1.438 (36.52)BMax..292 (7.42).380 (9.65).442 (11.23).530 (13.46).592 (15.04).680 (17.27).692 (17.58).780 (19.81).842 (21.39).930 (23.62).992 (25.20)1.080 (27.43).942 (23.93)1.030 (26.16)CMax..408 (10.36).408 (10.36).588 (14.17).588 (14.17).708 (17.98).708 (17.98).808 (20.56).808 (20.56).958 (24.33).958 (24.33)1.108 (28.14)1.108 (28.14)1.058 (26.87)1.058 (26.87)DMax..173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).173 (4.39).220 (5.59).220 (5.59)EMax..218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).260 (6.60).260 (6.60)F±.005.565 (14.35).565 (14.35).715 (18.16).715 (18.16).865 (21.97).865 (21.97).965 (24.51).965 (24.51)1.115 (28.32)1.115 (38.32)1.265 (32.13)1.265 (32.13)1.215 (30.86)1.215 (30.86)Avg.Weight***±5% (oz.)±5% (gm.).026 (0.73).025 (0.70).038 (1.10).035 (1.00).053 (1.50).050 (1.40).063 (1.80).056 (1.60).080 (2.30).073 (2.10).086 (2.45).076 (2.15).109 (3.10).093 (2.)**Add lead type and length, see Part Number Explanation.

***Weight given is with 1/2\

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

29

元器件交易网www.cecb2b.com

Micro-D Plastic Shell - .050\" Contact Spacing

MD*B-PCB connectors use standard MD*B allplastic shells and are designed for use withflex circuitry, printed circuit and multi-layerboards. They are easily mounted and solderedand provide high density/high reliability inboard-to-board and board-to-cable applica-tions. While being similar to the MDM-PCBconnectors, the MD*B-PCB connectors are allplastic, extremely small, and lightweight yetrugged enough for use in the most demandingapplications.

MD*B-PCB connectors are available in

seven shell sizes with 9 to 51 contacts in thepopular 90°narrow profile PCB termination,with a variety of tail lengths for varying boardthickness.

Jackpost mounting for use with locking hard-ware is also available.

If the connectors shown in the catalog do not meet the requirements of your applica-tions, a special shape, size or layout using the basic all plastic shell can be made avail-able. For further technical and applicationsinformation, contact customer service.

MD*B-PCB

How to Order

R

RoHS COMPLIANCESERIES

CONTACT ARRANGEMENTCONTACT TYPETERMINATION TYPEHARDWARE

TERMINATION TAIL LENGTHMODIFICATION CODES(Consult Factory)C

CONNECTOR SERIESM

MDVB, MDB

CONNECTOR ARRANGEMENT

9, 15, 21, 25, 31, 51C

CONTACT TYPE

S=SocketP=Pin

T

TERMINATION TYPE

CBR = 90°Narrow Profile PCBTerminationsH

HARDWARE

P=Jackpost

M7 = Jackposts, M635135-07No Letter = Less Hardware

TERMINATION TAIL LENGTH CODES

NONE–.109 (2.77) ±0.15 (0.38) StandardL61– .125 (3.18)L66– .150 (3.81)L57– .190 (4.83)

–.250 (6.35)L39

L58– .375 (9.52)

MD*B

-37SCBR*L39

-* * *

T

Dimensions shown in inch (mm)Specifications and dimensions subject to change

www.ittcannon.com

30

元器件交易网www.cecb2b.com

Micro-D Plastic Shell - .050\" Contact Spacing

CBR Series (90˚ Mounting Narrow Profile)

LASTCAV.109 +_.015_0.38)(3.77 ++MD*B-PCB

AC+JACKPOST 2-56 UNC-2BTYP.

EDBCAV.#1GFH.186 (4.72) PLUG.199 (5.05) RECEPTACLE**FOR 31: 1.085 (27.56) MAX. FOR 37: 1.185 (30.10) MAX. FOR 51: 1.225 (31.12) MAX.

FGH9-15-21-25 VIEW

_.005.096 +(2.44 +_0.31) DIA. TYP

PCB Termination Arrangements (Viewed from bottom of connector, on PCB solder side.)Indentification number shown for plug connector, use reverse order for socket connector.

.083(2.11)211598376.108(2.73)781465.100 (2.)TYP.4121311310219.020(0.51).083(2.11)1121.083 (2.11)109201987186171631415132112.020(0.51)121325112410229876519417183151621142321209Contacts

.020(0.51).050 (1.27)TYP..020(0.51)21 Contacts25Contacts

15 Contacts

17151613141112102794344428741206523232438222121192036.158 (4.00)1516301429312813122711102526924232287212065191843172119181716353418.183(4.65)1514333213123130111029982827262576242332222120135343332313029462847515049483937.050(1.27).108(2.73).020(0.51)3731 Contacts

.020(0.51)3651 Contacts

37 Contacts

All Termination Configurations .100 (2.) x .100 (2.) Grid Pattern, Offset .050 (1.27)Part NumberBy Shell SizeMD*B-9PCBR*MD*B-9SCBR*MD*B-15PCBR*MD*B-15SCBR*MD*B-21PCBR*MD*B-21SCBR*MD*B-25PCBR*MD*B-25SCBR*MD*B-31PCBR*MD*B-31SCBR*MD*B-37PCBR*MD*B-37SCBRMD*B-51PCBR*MD*B-51SCBRAMax..788 (20.01).788 (20.01).938 (23.82).938 (23.82)1.088 (27.63)1.088 (27.63)1.188 (30.17)1.188 (30.17)1.338 (33.98)1.338 (33.98)1.488 (37.79)1.488 (37.79)1.438 (36.52)1.438 (36.52)

B±.005 (0.13).565 (14.35).565 (14.35).715 (18.16).715 (18.16).865 (21.97).865 (21.97).965 (24.51).965 (24.51)1.115 (28.32)1.115 (28.32)1.265 (32.13)1.265 (32.13)1.215 (30.86)1.215 (30.86)

CMax..292 (7.42).375 (9.52).442 (11.23).525 (13.34).592 (15.04).675 (17.14).692 (17.58).775 (19.68).842 (21.39).925 (23.50).994 (25.25)1.075 (27.30).942 (23.93)1.026 (26.06)

DMax..218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).218 (5.).258 (6.55).258 (6.55)

EMax..134 (3.40).218 (5.).134 (3.40).218 (5.).134 (3.40).218 (5.).134 (3.40).218 (5.).134 (3.40).218 (5.).134 (3.40).218 (5.).177 (4.50).258 (6.55)

FMax..420 (10.67).420 (10.67).420 (10.67).420 (10.67).420 (10.67).420 (10.67).420 (10.67).420 (10.67).420 (10.67).420 (10.67).520 (13.21).520 (13.21).550 (13.97).550 (13.97)

G±.010 (0.25).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).250 (6.35).300 (7.62).300 (7.62)

H±.010 (0.25).230 (5.84).230 (5.84).130 (3.30).130 (3.30).130 (3.30).130 (3.30).130 (3.30).130 (3.30).130 (3.30).130 (3.30).130 (3.30).130 (3.30).150 (3.81).150 (3.81)

*For jackpost locking add letter \"P\" or \"M7\".

NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

31

元器件交易网www.cecb2b.com

Micro-D Plastic Shell - .050\" Contact Spacing

MDB Coaxial Series with Screw Mounting Holes

MDB connectors with two coaxial and five MICRO-PINTM /MICROSOCKETTMcontacts. Crimp-type coaxialcontacts accommodate RG-178/U cables. A plasticinsertion/extraction tool is supplied with each connec-tor assembly having removable coaxial assembly.

MDB Coaxial

How to Order - MDB Coaxial

R

RoHS COMPLIANCESERIES

SIGNAL CONTACT SPACINGTOTAL CONTACT CAVITIESNUMBER OFCOAXIALSCOAXIAL TYPE

SIGNAL CONTACT TYPESIGNAL CONTACT LEAD TYPESIGNAL CONTACT LEAD LENGTHMODIFICATIONHARDWARESERIES

Micro-D Coaxial

SIGNAL CONTACT SPACING1-.050 (1.27) centers

TOTAL CONTACT CAVITIES...................7NUMBER OFCOAXIALS.....................2

COAXIAL TYPE

NoLetter - Coaxialassembly

installed and nonremovableRO - coaxial assembly orderedserparately

RA - Coaxial shipped assembledbutuninstalledSIGNAL CONTACT TYPE

P-PinS-SocketSIGNAL CONTACT LEAD TYPE

L-Uninsulated, solid wire

H-Insulated, solid or strandedS-Solder pot*

SIGNALCONTACT LEAD LENGTHSee Standard Wire Termination

Code on page 29. Coaxial cable will be

RG-178U unless otherwise specified; lengthwill be same as wire modification.MODIFICATION

Consult customer service

HARDWARE

Noletter - No hardware

standard mounting. 091 (2.31) hole diameterF-Float

K-Jackscrew (standard)L-Jackscrew (low profile)P-Jackpost

*Not availablewith removalbe coax cable type connectors RO and RA.MDB

1

-7

C2

*

S

H

**

*

K

How to Order - Coaxial Cable Assemblies

R

RoHS COMPLIANCESERIES

COAXIALCABLECONTACT TYPECOAXIALCABLE TYPE

SERIESMD

COAXIAL CABLE CC

COAXIALCABLE LENGTH

CONTACT TYPEP-Pin

(used with socket side connection)S-Socket

(used with pin typeconnection)COAXIALCABLE TYPE1-RG178/U

Dimensions shown in inch (mm)

COAXIALCABLE LENGTH

See Standard WireTermination

Codes on page 29. Coaxial cable will beRG-178U unless otherwise specified; lengthwill be the same as wire modfication.

MD

CC

S

*

* * *

www.ittcannon.com

32

元器件交易网www.cecb2b.com

Micro-D Plastic Shell - .050\" Contact Spacing

Dimension - MDB Coaxial Series

(See page 9 for layouts)

TWO MTG. HOLES.091 +_.003 (2.31 +_0.08)DIA.AMDB Coaxial

Plug

.190 (4.83) Max.BCEE1+D1.000 (25.40) MAX.+.250 (6.35) MAX.EXTENSION FORROAND RACOAXES

.625 (15.88)MAX.Receptacle

.190 (4.83) Max.TWO MTG. HOLES.091 +_.003 (2.31 +_0.08)DIA.ABCEE1+D1.000 (25.40) MAX.+.250 (6.35) MAX.EXTENSION FORROAND RACOAXES

.625 (15.88)MAX.DECBAPartNumber

_.005 (0.13)+Max.Max.Max.Max.byShell Size

MDB1-7C2P*.204 (5.18).298 (7.57).782 (19.86).395 (10.03).510 (12.95)MDB1-7C2S*.185 (4.70).279 (7.09).782 (19.86).375 (9.52).602 (15.29)

* Add lead type andlength, see PartNumber Explanation.

** Weight given is with 7 inch (177.80) insulated leads, #26 AWG silver plated copper pigtails and RG178/U coaxials.

E1Max..510 (12.95).0 (13.72)Avg.Weight**_5% (gm.)+_5%(oz)+

.290 (8.30).273 (7.80)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

33

元器件交易网www.cecb2b.com

Micro-D Plastic Shell - .050\" Contact Spacing

Mounting Hardware Views (Sizes 9-51)

This hardware supplied unassembled.

LOCK SCREW RETAINING CLIP.408 (10.36) MAX. .182 (4.62) .688 (17.48) MAX. MAX. MATING FACE MD

#2-56 UNC-2B CONNECTOR SHOWN FOR REF. ONLY

.185 (4.70) MAX. PANELREF. BUSHING .500 (12.7) MAX. Screw Lock Assembly

.093 (2.36) RECOMMENDED PANELTHICKNESS #2-56 UNC-2A.232 (5.) MAX. Jackpost - (P).052 (1.32) TYP. Screw Lock Assembly*.096 ± .005(2.44 ± 0.13)DIA..170 (4.32) MAX. .178 ± .005(4.52 ±0.13)#2-56 UNC-2B THD .260 (6.60) MAX. 90˚ Angle Mounting Bracket

AB90˚ Angle Mounting Bracket*NOTE: Torque value is 4.0 in/lbs max. Description

Screw Lock Assembly Jackpost Kit

Mounting Bracket, 90˚ Angle- MD*1

for 9 thru 37 Shell Sizes MD*1

for 51 Shell Size

Part Number322-9500-000 320-9505-000

A±.005 (0.13)

BMax.

015-9516-000 .100 .215

(2.) (5.46)

015-9516-000 .122 .257

(3.10) (6.53)

NOTES: Screw lock assembly (322-9500-000) can be used forfront front mounting. Jackpost kit

(320-9505-000) consists of 2 assemblies, shipped unassembled.

This hardware is factory installed.

.014 +_.004(0.36 +_0.10) ALLOWABLEDIAMETRAL FLOAT.020 (0.51) MAX. ALLOWABLEAXIAL FLOATMATINGFACE.150 +_.003(3.81 +_.076)CONNECTORSHOWN FORREF. ONLY.490(12.45) MAXCONNECTORSHOWN FORREF ONLYHEX HEAD -

.050 (1.27) ACROSS FLATS.050 (1.27) DEEP (REF).155(3.94) MAX..185 (4.70)MAX.093(2.36)REF..090 +_.0015(2.29 +_0.038)DIA.031 +_.003(0.79 +_0.08)

MATINGFACE

#2-56UNC-2APART HAS A .040 (1.02)MAX AXIAL FLOATMATINGFACE

PART HAS A .040 (1.02)MAX. AXIAL FLOAT#2-56UNC-2AFloat Mount - (F)Jackscrew - (K) Standard

Jackscrew - (L) Low Profile

*NOTE: Torque values are as follows: Low Profile Jackscrew (L)-2.5 in/lbs Standard Jackscrew (K)-2.5 in/lbs

Shown here is a cutaway view of the float mount fortheMDconnector.

The basic shell dimensions are the same forthefloat mount and thescrew mounting hole configurations. View shown is for standard floatmount front panel mounting. Reverse mounting is available on request.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

34

元器件交易网www.cecb2b.com

Micro-D Plastic Shell - .050\" Contact Spacing

Mounting Hardware to Military Specification (Sizes 9 - 51) PER MIL-DTL-83513/5

This hardware supplied unassembled.

#2-56 UNC-2ATHREAD TYP.PLUG (REF. WITH.092 (2.34) DIA.MOUNTING HOLES#2-56 UNC-2ATHREAD TYP.MD

PLUG (REF.) WITH.092 (2.34) DIA.

MOUNTING HOLES.125 (3.18) HEX#2-56 UNC-2B Thread.190 (4.83)+_ .185 (4.70).062 (1.57)±.010 (0.25).475 (12.06)±0.25 (0.).361 (9.17)MAX..010 (0.25)TH'K (REF.).010 (0.25)TH'K (REF.).062 (1.57)HEX. (REF.)

POTTING WELL (REF.)POTTING WELL(REF.)Jackscrew - (L) Low profile *

Allen head

Optional Head ConfigurationPlug and ReceptacleJackscrew - (K) High ProfileLow and High ProfileSlotted Head

Description Slotted Head Jackscrew Assy Low Profile

Slotted Head Jackscrew Assy High ProfileAllen Head Jackscrew Assy Low ProfileAllen Head Jackscrew Assy High ProfileJackpost Assy

M83513/5-05-06-02-03-07

RETAINING NUT.1 (3.91) HEX.LOCK WASHER#2-56 UNC-2AThread

Jackpost Assembly

Mode CodeM5M6M2M3M7

Part Number320-9508-025320-9508-027320-9508-026320-9508-028320-9505-033

Jackpost Bushing (For Rear Panel Mounting)

HEX IS .135 (3.431/.115 (2.92) ACROSS FLATS.170 (4.32).185 (4.70)#2-56 UNC 2B THDMATING FACE

.075 (1.91)CAA.126 (3.20).125 (3.18)DIA.TYP.

+.005 (0.13)-.000 (0.00)RTYP.++B.500 (12.7).480 (12.19)27˚/26˚TYP#2-56 UNC2A THDPanelThickness 3/32 (2.4)1/16 (1.6)3/ (1.2)1/32 (0.8)

ADim.

.092/.087 (2.34/2.21).061/.056 (2.34/1.42).047/.042 (1.19/1.07).030/.025 (0.76/0.)

Jackpost KitNumber*320-9505-007320-9505-006320-9505-005320-9505-004

Plug and Receptacle Dimensions

A

+.004 (0.10)-.000 (0.00).379 ( 9.63).529 (13.44).679 (17.25).779 (19.79).929 (23.60)1.079 (27.41)1.029 (26.14)

BC+.004 (0.10)

+_.005(0.13)

-.000 (0.00).219 (5.56).219 (5.56).219 (5.56).219 (5.56).219 (5.56).219 (5.56).261 (6.63)

.565 (14.35).715 (18.16).865 (21.97).965 (24.51)1.115 (28.32)1.265 (32.13)1.215 (30.86)

Shell Size

9152125313751

*2Jackposts, 2nuts, 2washers.

NOTE: Torque value for jackpost 2.5 in/lbs

Panel Mounting Dimensions

.200 ±.005(5.08 ±0.13).300 ±.005(7.62 ±0.13).395 ±.005(10.03 ±0.13)Plug and Receptacle

Rear Mounted

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Plug and ReceptacleFront MountedPlug Front MountedReceptacle Rear Mounted

www.ittcannon.com

35

元器件交易网www.cecb2b.com

Micro-D Plastic Shell - .050\" Contact Spacing

MD

Panel Cutouts

DTYP.CBFULL R.(TYP.)A.015 (0.38)R.MAX.(TYP)Front Mounting

Figure 1C.005 (0.13) R TYPDA.075 (1.91)+-.000 (0.00)

BFULL R. (TYP.)26˚/27˚TYPFigure 2Rear Mounting

.450 ±.002C(11.43 ±0.05).030 (0.76) TYP.D++++FULL R.(TYP.)PANELREF.Figure 3

Edgeboard Mounting

A

B

C

D

Cutout+.004 (0.10)+.004 (0.10)+.005 (0.13)+.005 (0.13)SizeFigure-.000 (0.00)-.000 (0.00)-.000 (0.00)-.000 (0.00)1.409 (10.39).172 (4.37).570 (14.48).0 (2.26)9

2.379 ( 9.63)

.219 (5.56)

.570 (14.48).0 (2.26)3--.570 (14.48).0 (2.26)1.559 (14.20).172 (4.37).720 (18.29).0 (2.26)15

2.529 (13.44)

.219 (5.56)

.720 (18.29).0 (2.26)3--.720 (18.29).0 (2.26)1.709 (18.00).172 (4.37).870 (22.10).0 (2.26)21

2.679 (17.25)

.219 (5.56)

.870 (22.10).0 (2.26)3--.870 (22.10).0 (2.26)1.809 (20.55).172 (4.37).970 (24.).0 (2.26)25

2.779 (19.79)

.219 (5.56)

.970 (24.).0 (2.26)3--.970 (24.).0 (2.26)1.959 (24.36).172 (4.37)1.120 (28.45).0 (2.26)31

2.929 (23.60)

.219 (5.56)

1.120 (28.45).0 (2.26)3--1.120 (28.45).0 (2.26)11.109 (28.17).172 (4.37)1.270 (32.26).0 (2.26)37

21.079 (27.41)

.219 (5.56)

1.270 (32.26).0 (2.26)3--1.270 (32.26).0 (2.26)11.059 (26.90).215 (5.46)1.220 (30.99).0 (2.26)51

21.029 (26.14)

.261 (6.63)

1.220 (30.99).0 (2.26)3

--1.220 (30.99)

.0 (2.26)

NOTES:

1. Front mounting (figure 1) and rearmounting (figure 2) accommodates #2-56 screws.

2. Front mounting is preferred. However, when rear mounting is necessary. use detail on previous page.

3. Edgeboard mounting bracket (figure3) uses #2-56 screws. Dimension .450 ± .002 (11.43 ± 0.05) locates the

MD receptacle flush with the end of the board.

www.ittcannon.com

36

元器件交易网www.cecb2b.com

Micro-D Plastic Shell - .050\" Contact Spacing

How to Order

PCB ordering information - page 30

RoHSCOMPLIANCE

SERIES-INSULATOR STYLE-MATERIALCONTACTSPACINGCONTACTARRANGEMENTCONTACTTYPETERMINATION TYPETERMINATION CODELOCKINGHARDWARE

SERIES-INSULATOR STYLE-MATERIAL

MD - Clip mounting -Diallyl phthalateMDV - Clip mounting-PolyesterCONTACTSPACING

1-.050(1.27) centers

CONTACTARRANGEMENT

9-15-21-25-31*-37-51.See page 7CONTACTTYPE

P-Pin S - Socket

TERMINATION TYPE

H-Insulated solid or stranded wire L-Uninsulated solid wire

S-Solder pot to accept #26 AWG max.

harness wire.

R

MD

1-9

P

MD/MDV

H

001

P

TERMINATION CODE**

(H) 001 - 18\ 7/34strand,#26 AWG,

MIL-W-16878/4, Type ETeflon,Yellow.

(H) 003 - 18\ 7/34strand,#26 AWG,

MIL-W-16878/4, Type ETeflon,color

coded to MIL-STD-681 System I.

(L) 1 - 1/2\"uninsulated solid #25AWG gold plated copper.(L) 2 - 1\"uninsulated solid #25AWG gold plated copper.

No designator - No hardware - standard mounting.091 (2.31) hole diameter

*Not available in clip mounting.

**See page 79 and 81for additional codes.

With Clip Mounting Slots

Plug

MD

Glass-filled Diallyl PhthalatePlastic Insulator

MDV

Glass-filled PolyesterPlastic Insulator

B.022 (0.56)MAX..130(3.30)MAX.E.093 ± .005(2.36 ± 0.13).065 (1.65)MAX..204 (5.18)MAX..375 (9.52)MAX.CD.170(4.32)

ASolder Pot

Receptacle

B.022 (0.56)MAX.E.093 ± .005(2.36 ± 0.13).170(4.32)MAX.D.210(5.33)

.065 (1.65)MAX..185 (4.69)MAX..356 (9.04)MAX.CASolder Pot

Part Number by Shell SizeMD1-9P**MD1-9S**MD1-15P**MD1-15S**MD1-21P**MD1-21S**MD1-25P**MD1-25S**MD1-37P**MD1-37S**MD1-51P**MD1-51S**MDV1-9-P**MDV1-9S**MDV1-15P**MDV1-15S**MDV1-21P**MDV1-21S**MDV1-25P**MDV1-25S**MDV1-37P**MDV1-37S**MDV1-51P**MDV1-51S**AMax..512 (13.00).512 (13.00).662 (16.81).662 (16.81).812 (20.62).812 (20.62).912 (23.16).912 (23.16)1.212 (30.78)1.212 (30.78)1.162 (29.51)1.162 (29.51)BMax..292 (7.42).376 (9.55).442 (11.23).526 (13.36).592 (15.04).676 (17.17).692 (17.58).776 (19.71).992 (25.20)1.076 (27.33).942 (23.93)1.026 (26.06)CMax..405 (10.29).405 (10.29).555 (14.10).555 (14.10).705 (17.91).705 (17.91).805 (20.45).805 (20.45)1.105 (28.07)1.105 (28.07)1.055 (26.80)1.055 (26.80)DMax..170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).170 (4.32).213 (5.41).213 (5.41)EMax..215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).215 (5.46).258 (6.55).258 (6.55)Avg. Weight***±5% (oz.)/±5% (gm.)

.026 (0.73).026 (0.73).038 (1.10).035 (1.00).053 (1.50).050 (1.40).063 (1.80).056 (1.60).086 (2.45).076 (2.15).109 (3.10).093 (2.65)**Add lead type and length, see Part Number Explanation.Dimensions shown in inch (mm)Specifications and dimensions subject to change***Weight given is with 1/2\www.ittcannon.com37

元器件交易网www.cecb2b.com

Micro-D Plastic Shell - .050\" Contact Spacing

Panel Mounting Hardware

MD**

Clip Mounting

Illustratedistherecommended methodoffront mountingwith metal panel mounting keys. Panel mounting keys areavailable with or without coupling retention clips.

Forfront mounting,placetherear of theconnectorthruthepanelcutout.Withthemountingflangeagainstthepanel,fullyinsertthepanelmountingkeysthrutheslotsintheflangeandthruthepanelcutout.Retainingthekeys in this position, bend them outward against the rearofthepanel.Whenmatingafront mountedconnectorwithanunmountedconnector, acouplingretention clipassembly may be used to securely lock the two together.Mountingscrew bracketsare availableandmaybeusedinstead of the panel mounting keys.

Description

Panel Mounting Key

Mounting Key and Coupling Clip AssemblyMounting Screw Bracket

Part Number201-9100-000294-9100-000015-9100-000015-5009-000MD51428-1

Coupling Retention Clip

(see Figure 2)Mounting Screw Brackets(see Figures 1 and 3)

*Edgeboard Mounting Bracket**Edgeboard Mounting Bracket and

Coupling Clip Assemblyassembly.

Edgeboard Mounted

(see Figure 4)PanelMounting Key

*Must be ordered separately; specify left and right hand for complete**Must be ordered separately; assembly contains set of left and right

hand types.

Dimensions (Clip Mounting Only)

.200 ± .005 (5.08 ± 0.13).330 ± .005(8.38 ± 0.13).265 ± .005 (6.73 ± 0.13)Plug and Receptacle

Rear MountedPlug and ReceptacleFront MountedPlug Front MountedReceptacle Rear Mounted

Panel Cutouts

DCABAFULL R. (TYP.).015 (0.38)R.MAX. (TYP.)

.015 (0.38)R.MAX. (TYP.)

BFigure 1

Front Mounting

CA.075 + .005 - .000(1.91 + 0.13 _ 0.00)BFULL R. (TYP.)26˚/27˚ TYP.

.018 + .002 - .000(0.46 + 0.05 - 0.00)Figure 2

.005 (0.13) MAX.R. (TYP.)

BAD.182 + .004 - .000(4.62 + 0.10 - 0.00)PANEL REF.Figure 3Rear MountingFigure 4

Edgeboard Mounting

1.Apanel thickness of 1/8\" 3.17mm) maximum is recommended for ease of tab bending

when a panel mounting key & clip assembly or edgeboard mounting brackets are used.2.Front mounting is preferred. However, when rear mounting is necessary, use figure 3 for

dimensions.

3.Figure 4 is for edge board mounting bracket or edgeboard clip assembly. The .184 +_ .002

2.67 +_ 0.05) dimension locates the MD socket insulator flush with the end of the board.4.Screw brackets (015-9100-000) will accommodate #2-56 screws.

5.Front mounting(Figure 1)andrearmounting(Figure 3)accommodate#2-56screws.

ABCDShellCutout+.004 (0.10)+.004 (0.10)+.004 (0.10)+.005 (0.13)SizeFigure-.000 (0.00)-.000 (0.00)-.000 (0.00)-.000 (0.00)

1.408 (10.36).172 (4.37).650 (16.51).0 (2.26)2.408 (10.36).172 (4.37)--93.378 ( 9.60).217 (5.51).650 (16.51).0 (2.26)4.400 (10.16).091 (2.31)--1.588 (14.94).172 (4.37).795 (20.19).0 (2.26)2.588 (14.94).172 (4.37)--153.528 (13.28).217 (5.51).795 (20.19).0 (2.26)4.550 (13.97).091 (2.31)--1.738 (18.75).172 (4.37).945 (24.00).0 (2.26)2.738 (18.75).172 (4.37)--213.678 (17.27).217 (5.51).945 (24.00).0 (2.26)4.700 (17.78).091 (2.31)--1.838 (21.29).172 (4.37)1.045 (26.).0 (2.26)2.838 (21.29).172 (4.37)--253.778 (19.76).217 (5.51)1.045 (26.).0 (2.26)4.800 (20.32).091 (2.31)--11.138 (28.91).172 (4.37)1.345 (34.16).0 (2.26)21.138 (28.91).172 (4.37)--3731.078 (27.38).217 (5.51)1.345 (34.16).0 (2.26)41.100 (27.94).091 (2.31)--11.088 (27.).215 (5.46)1.295 (32.).0 (2.26)21.088 (27.).215 (5.46)--5131.028 (26.11).260 (6.60)1.295 (32.).0 (2.26)41.050 (26.67).091 (2.31)--

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

38