EVERLIGHT ELECTRONICS CO.,LTD.
DATA SHEET
PART NO. ：DATE ：DEPARTMENT：REVISION ：
17-21SYGC/S530-E2/TR82005.08.17.SZIE2
RECEIVED■MASS PRODUCTION□ PRELIMINARY
□ CUSTOMER DESIGN
DEVICE NUMBER : SZ DSE-171-024 PAGE :9
CUSTOMERDESIGNER
CHECKER
APPROVER
Meng Yali AuhBuck
2
REV New data sheet approve
DESCRIPTION
2005.08.17
RELEASE DATE
OFFICE : NO 25,Lane 76,Chung Yang Rd,Sec.3 Tucheng, Taipei 236, Taiwan, R.O.C.TEL : 886-2-2267-2000,2266-9936 ( 22 Lines )FAX : 886-2-2267-6189
http://www.everlight.com
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0805 Package Chip LEDs
17-21SYGC/S530-XX/TR8 Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow
solder process. ․Mono-color type. ․Pb-free.
․The product itself will remain within RoHS complaint Version.
Descriptions
․The 17-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax.
․Flat backlight for LCD, switch and symbol. ․General use.
Device Selection Guide
Part No.
17-21SYGC/S530-XX/TR8
Lens Color
Material Emitted Color AlGaInP
Brilliant Yellow Green
Water Clear
Chip
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 9 Device No :SZ DSE-171-024 Prepared date:17-Aug-2005 Prepared by:Meng Yali
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SYGC/S530-XX/TR8
Package Outline Dimensions -+ Note: The tolerances unless mentioned is ±0.1mm, Unit = mm
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 9 Device No :SZ DSE-171-024 Prepared date:17-Aug-2005 Prepared by:Meng Yali
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SYGC/S530-XX/TR8 Absolute Maximum Ratings (Ta=25℃)
Parameter SymbolReverse Voltage Forward Current Operating Temperature Storage Temperature
Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Soldering Temperature
VRIFTopr Tstg
Rating Unit 5 V 25 mA -40 ~ +85 -40~ +90
℃ ℃
V mW
ESD 2000 Pd IFP
60
60 mA Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.
Tsol
Electro-Optical Characteristics (Ta=25℃)
*Chip
Parameter Symbol Rank
Min. Typ. Max. Unit Condition
E1 12 17 ----- Luminous Intensity
Iv
E2 17 23 ----- mcd
E3 22 31 ----- E4 27 41 ----- Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation
Bandwidth Forward Voltage Reverse Current
2θ1/2 ----- ----- 140 ----- deg IF=20 mA
λp ----- ----- 575 ----- nm λd ----- ----- 573 ----- nm △λ ----- ----- 20 ----- nm VFIR
V ----- 1.7 2.0 2.4 ----- ----- ----- 10
μA
VR=5V
*17-21SYGC/S530-XX/TR8 Chip Rank
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 9 Device No :SZ DSE-171-024 Prepared date:17-Aug-2005 Prepared by:Meng Yali
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SYGC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 9 Device No :SZ DSE-171-024 Prepared date:17-Aug-2005 Prepared by:Meng Yali
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD. 17-21SYGC/S530-XX/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank xxxxxxxxxxxxRoHSxxxxxxxxxxxxxxxxxxxxxxxx Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm, Unit = mm
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 9 Device No :SZ DSE-171-024 Prepared date:17-Aug-2005 Prepared by:Meng Yali
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SYGC/S530-XX/TR8
Carrier Tape Dimensions: Loaded quantity3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm , Unit = mm Moisture Resistant Packaging LabelAluminum moisture-proof bagDesiccantLabel Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 9 Device No :SZ DSE-171-024 Prepared date:17-Aug-2005 Prepared by:Meng Yali 元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SYGC/S530-XX/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10%
Test Sample
No. Items Test Condition Ac/Re
Hours/Cycles Size
Temp. : 260℃±5℃
1 Reflow Soldering 22 PCS.0/1 6 Min.
Min. 5sec. H : +100℃ 15min
300 Cycles 2 Temperature Cycle ∫ 5 min
L : -40℃ 15min H : +100℃ 5min
3 Thermal Shock ∫ 10 sec
L : -10℃ 5min
High Temperature
Temp. : 100℃ 4
Storage
Low Temperature
Temp. : -40℃ 5
Storage 6 7
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 9 Device No :SZ DSE-171-024 Prepared date:17-Aug-2005 Prepared by:Meng Yali
22 PCS.0/1
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.22 PCS.22 PCS.22 PCS.22 PCS.
0/1 0/1 0/1 0/1 0/1
DC Operating Life High Temperature /
High Humidity
IF = 20 mA 85℃/ 85%RH
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SYGC/S530-XX/TR8 Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package : The LEDs should be kept at 30℃ or less and 60%RH or less(Floor life). However, it's recommended that the LEDs should be used within 168 hours (7 days) after opening
the package. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 9 Device No :SZ DSE-171-024 Prepared date:17-Aug-2005 Prepared by:Meng Yali
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
17-21SYGC/S530-XX/TR8
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 9 Device No :SZ DSE-171-024 Prepared date:17-Aug-2005 Prepared by:Meng Yali
因篇幅问题不能全部显示，请点此查看更多更全内容